Psion Teklogix PowerScan M8300 Manual do Utilizador descarregar pdf (Página 12)

PSION

6PowerScan™ M8300

5. Remove the plastic from the other side of the strips and affix the

base to the table.

6. If mounting the BC-80X0 cradle, insert the antenna in the appropri-

ate hole on the body of the cradle and screw it clockwise until tight.

For mounting with screws:

1. Position the cables to be connected to the BC-80X0 cradle along the

dedicated channels, as shown in the figures below.

2. Position the base on the table and affix it by means of the screws (not

provided).

3. Position the cradle on the base by sliding it along the mounting tabs

until aligned.

4. If mounting the BC-80X0 cradle, insert the antenna in the appropri-

ate hole on the body of the cradle and screw it clockwise until tight.

Wall Mounting

1. Remove the yellow caps and insert the two wall mounting lock hinges

provided with your cradle.

2. Position the cables to be connected to the BC-80X0 cradle along the

dedicated channels (see figures on the previous page).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Sem comentários

Psion Teklogix PowerScan M8300 Manual do Utilizador Página 12