Psion Teklogix ISO 9001 Manual do Utilizador descarregar pdf (Página 39)

Chapter 4: Mechanical Considerations

Overview

Psion Teklogix NEO HDK User Manual 31

4.1 Overview

This chapter describes the physical connectors, space, and mounting of an add-on device.

4.2 HDK Mechanical Files

The NEO Hardware Development Kit provides the following mechanical models and

drawings:

4.3 Installation

Add-on devices can be screw-mounted using the four threaded anchor points, or snap-

mounted using the three mounting slots.

To ensure proper connection with the expansion port contact pads, it may be necessary to

remove the black Mylar overlay that surrounds the expansion port. To remove the overlay

insert a small flathead screwdriver between the overlay and the case and carefully pry it off.

Filename Description

neo_housing_and_bracket_asm.igs 3D CAD drawing of the back cover of

the

NEO

neo_expansion_PAD_DETAILS.pdf 2D drawing of the back cover of the

NEO, with distances between anchor

points

Important: If the add-on device connects to any of the 16 small connector pads, it

should be screw-mounted. Snap-mounted devices should only connect via

the 2 large connector pads.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 63 64

Sem comentários

Psion Teklogix ISO 9001 Manual do Utilizador Página 39