Psion Teklogix PrintAbout MP2000 Especificações descarregar pdf (Página 16)

Printek Emulation

Variable Size Reverse Line Feed ESC Q J n

Causes paper to be moved in the reverse direction n x 0.125mm. 0 ≤ n ≤ 255.

A Carriage Return is also performed.

Note that reverse paper motion is not supported in MLP3040 SL models and this command is ignored.

Example: The following escape sequence moves paper in the reverse direction two millimeters (2 ÷ 0.125).

Escape Sequence: ESC Q J 16

Hexadecimal: 1B 51 4A 10

Vertical Tab VT

Advances the paper five lines. If a partial line exists in the buffer, that line will be printed including a Carriage

Return and Line Feed, and then the paper advanced five lines.

A Carriage Return is also performed which places the current print position at the beginning of the next line.

Control code: VT

Hexadecimal: 0B

Form Feed FF

If a partial line exists in the buffer, that line will be printed including a Carriage Return and Line Feed, and then

the paper will be advanced as described below.

For printers that use rolls of print media, (not “SL” models), the paper will be advanced by the “FFeed

Distance” set for the current Format (refer to the Operator’s Manual for more information).

For printers that use cassette media (MLP 3040 SL), the current sheet of paper will be ejected.

A Carriage Return is also performed which places the current print position at the beginning of the next line.

Control code: FF

Hexadecimal: 0C

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 60 61

Sem comentários

Psion Teklogix PrintAbout MP2000 Especificações Página 16