Psion Teklogix 9160 G2 Manual do Utilizador descarregar pdf (Página 174)

100

101

Chapter 13: Setting The Wireless Interface

Configuring “Internal” Wireless LAN Settings

150 Psion Teklogix 9160 G2 Wireless Gateway User Manual

13.5 Configuring “Internal” Wireless LAN Settings

The Internal Settings describe the MAC Address (read-only) and Network Name (also

known as the SSID) for the internal Wireless LAN (WLAN) as described in Table 13.4.

Mode

The

Mode

defines the

Physical Layer

(

PHY

) standard being used by the radio.

The 9160 G2 Wireless Gateway is available as a single or dual-band access point with one or two

radios. The configuration options for Mode differ depending on which product you have.

Single-Band AP:

For the Single-Band AP, select one of these modes:

• IEEE 802.11b

• IEEE 802.11g

Dual-Band AP:

For the dual-band AP, select one of these modes: a mode for each Radio Interface.

• IEEE 802.11b

• IEEE 802.11g

• IEEE 802.11a

One or Two-Radio AP:

If you have a two-radio AP, select an IEEE 802.11 mode for each of the two radio interfaces. (For a

one-radio AP there is only one radio interface.)

Channel

Select the

Channel

. The range of channels and the default is determined by the

Mode

of the radio

interface.

The

Channel

defines the portion of the radio spectrum the radio uses for transmitting and receiving.

Each mode offers a number of channels, dependent on how the spectrum is licensed by national and

transnational authorities such as the Federal Communications Commission (FCC) or the International

Telecommunication Union (ITU-R).

The default is

Auto

, which picks the least busy channel at startup time.

Table 13.3 Radio Interface Settings

Field Description

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 435 436

Comentários a estes Manuais

Sem comentários

Psion Teklogix 9160 G2 Manual do Utilizador Página 174

Comentários a estes Manuais