Psion Teklogix 9160 G2 Manual do Utilizador descarregar pdf (Página 341)

Chapter 26: Back Up & Restore Configuration

Rebooting The Access Point

Psion Teklogix 9160 G2 Wireless Gateway User Manual 317

For example, a 9160 G2 model “9160 Wireless Gateway” will not restore a

configuration file saved from a 9160 G2 model “9160 Wireless Gateway

(Dual Radio)”.

2. Click the Restore button.

The access point will reboot.

Note: When you click Restore, the access point will reboot. A “reboot” confirmation dialog

and follow-on “rebooting” status message will be displayed. Please wait for the

reboot process to complete (a minute or two). After a moment, try accessing the

Administration Web pages as described in the next step; they will not be accessible

until the AP has rebooted.

When the access point has rebooted, access the Administration Web pages either by clicking

again on one of the tabs (if the UI is still displayed) or by typing the IP address of the access

point into your browser. Now you should see the configuration settings restored to the origi-

nal settings you retrieved from the Backup file.

26.5 Rebooting The Access Point

For maintenance purposes or as a troubleshooting measure, you can reboot the 9160 G2

Wireless Gateway as follows.

1. Click the Maintenance > Configuration tab.

2. Click the Restore button.

The access point will reboot.

26.6 Upgrading The Firmware

As new versions of the 9160 G2 Wireless Gateway firmware become available, you can

upgrade the firmware on your devices to take advantage of new features and enhancements.

Important: Do not upgrade the firmware from a wireless client that is associated with the

access point you are upgrading. Doing so will cause the upgrade to fail. Fur-

thermore, all wireless clients will be disassociated and no new associations

will be allowed.

If you encounter this scenario, the solution is to use a wired client to gain

access to the access point:

• Create a wired Ethernet connection from a PC to the access point.

• Bring up the Administration UI.

Repeat the upgrade process with the wired client.

1 2 ... 336 337 338 339 340 341 342 343 344 345 346 ... 435 436

Sem comentários

Psion Teklogix 9160 G2 Manual do Utilizador Página 341