
Psion Teklogix netpad Windows CE .NET 4.2 User Manual 163
Chapter 8: netpad Accessories
Battery Charger Instructions
8.4 Battery Charger Instructions
8.4.1 Important Safety Instructions
• The AC plug is a power disconnect device. The socket must be near the
equipment and easily accessible.
• To reduce the risk of damage to the electric plug and cord when unplugging
the AC adaptor, pull the plug rather than the cord.
• Make sure that the AC adaptor and cord are positioned so that they are not
stepped on, tripped over, or otherwise subjected to damage or stress.
• Do not operate the charger with a damaged adaptor, cord or plug. Replace
them immediately.
• Do not operate the charger if it has received a sharp blow, been dropped, or
otherwise damaged in any way; it should be inspected by qualified service
personnel.
• Do not disassemble the charger or adaptor; they should be repaired by qual-
ified service personnel. Incorrect reassembly may result in electric shock or
fire.
• To reduce the risk of electric shock, unplug the adaptor from the outlet
before attempting any maintenance
or cleaning.
• Do not expose the charger or adaptor to rain or snow.
8.4.2 Charging A Battery
Insert the battery, making sure the battery is inserted correctly. The LED below the
battery will light up (red), indicating that the battery is charging. If the red LED
blinks, this indicates that the temperature of the battery is below the minimum or
above the maximum operating temperature for charging, or that the battery is not
functioning properly and is not capable of being charged.
Note: If the battery is left in the charger, charging will automatically begin when
the battery reaches a temperature within the allowable range for charging.
The typical charging time for an 1100 mAh Li-Ion pack is 2 to 2.5 hours, the 1800
mAh pack is 3.5 to 4 hours, and the 4400 mAh pack is 6 hours. When the battery is
fully charged and ready for use, the LED indicator will turn green.
Comentários a estes Manuais