Psion Teklogix netpad Manual do Utilizador descarregar pdf (Página 59)

Psion Teklogix netpad Windows CE .NET 4.2 User Manual 33

Chapter 2: Getting Started

Performing A Hard Reset

Figure 2.27 Reset Button Location

After a soft reset, any changes to open files will be lost. Your other files on the inter-

nal disk will almost always be safe. It is possible (although unlikely) that performing

a soft reset after a program failure may cause the netpad to lose the information on

the internal disk; it could even prevent the reset from working at all. If this happens,

you will have to perform a “hard reset”.

Important: A hard reset resets the netpad completely, and all information on

the internal disk will be lost. However, some of your data can be

protected from loss using Total Recall. Please refer to page 88

for details.

2.9.2 Performing A Hard Reset

1. Remove the netpad from the docking station (if applicable).

2. Remove the main battery.

3. Press and hold down the On/Off button (on the top of the unit).

4. While continuing to hold down the On/Off button, press and release

the Reset button.

5. Release the On/Off button.

6. Refit the battery into the netpad—the unit will power up and you will

hear one beep during boot-up.

Note: Hard resetting the netpad may delete the partnership on the netpad. If that

occurs, you may delete and re-create the partnership on the PC, or create

another partnership with a new name. Refer to ActiveSync’s online help

for details.

MMC

SIM Card

Reset Button

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 229 230

Sem comentários

Psion Teklogix netpad Manual do Utilizador Página 59