Psion Teklogix netpad Manual do Utilizador descarregar pdf (Página 91)

Psion Teklogix netpad Windows CE .NET 4.2 User Manual 65

Chapter 4: Configuring The netpad

Bar Codes

Suffix Char

This character, if non-zero, is added after a successfully decoded bar code. Enter the

desired character, or enter a value of 00 (zero) if no prefix is to be added. The default

character is 00 and is input with the <Esc> key. To append a control character (in the

range of 0 to 32 ASCII) as a prefix, press the <Ctrl> key and the corresponding

letter (a=0, b=1, c=2, etc.).

Strip Leading

This parameter determines the number of characters that will be removed from the

beginning of the bar code before the prefix character is added.

Note: 1.The appended character is treated as any other keyboard character. For

example, if <Tab> is pressed, the usual action for that key is performed.

Strip Trailing

The value entered in this parameter determines the number of characters that will be

removed from the end of the bar code before the suffix character is added.

DECODED SETTINGS

Trioptic C39

Trioptic Code 39 symbols contain six characters. Trioptic C39 and C39 Full ASCII

(see below) should not be enabled simultaneously. Turn this parameter OFF if C39

Full ASCII is ON.

Convert C39 to C32

Code 32 is a variant of Code 39 that is used by some industries. If this parameter is

ON, Code 39 must be enabled.

C32 Prefix

If this parameter is ON, the prefix character “A” is added to the Code 32 bar code. If

this parameter is ON, Convert C39 to C32 must be enabled.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 229 230

Sem comentários

Psion Teklogix netpad Manual do Utilizador Página 91