Psion Teklogix netpad Manual do Utilizador descarregar pdf (Página 60)

Chapter 2: Getting Started

The Scanner

Psion Teklogix netpad Windows CE .NET 4.2 User Manual

2.10 The Scanner

Where fitted with a bar code scanner, the netpad may be used to read industry

standard bar codes. To scan a bar code, point the scanner window at the bar code,

ensuring that the scanner window is not obstructed and that you are between

5 cm (2 in) and 60 cm (24 in) from the bar code. Activate the scanner as instructed

in the software application’s operating instructions. The scanning beam should be

energized until a successful decode is achieved or three seconds have elapsed.

For detailed information on bar codes, scanner properties, and configuration, please

refer to “Scanner Properties” on page 60.

Figure 2.28 Scanner Location

Warning: For your own safety, it is critical that you comply with the

following warnings:

1. Do not look into the scanner window.

2. This product contains a laser scanner that emits less than 1.2 mW

average radiant power at a wavelength of 650 nm. This product

complies with 21 CFR 1040.10, 1040.11 and DIN EN 60825-1:

January 2001, and is classified as a Class 2 laser product.

3. CAUTION – Using controls or adjustments, or performing proce-

dures other than those specified herein may result in hazardous

radiation exposure.

4. CAUTION – The use of optical instruments with this product will

increase eye hazard.

Scanner Window

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 229 230

Sem comentários

Psion Teklogix netpad Manual do Utilizador Página 60